5448 Firmware update | DELL Technologies
I see the lateest firmware for the 5448 is 4.0.1.0, A01
PowerConnect 5424のサポート | ドライバーおよびダウンロード | Dell 日本
お使いのDell PowerConnect 5424のドライバおよびダウンロードファイルを取得します。最新のドライバ、ファームウェア、ソフトウェアをダウンロードしてインストールします。
先日、購入したDELL PowerConnect 5424のファームウェアが古いものだったので、更新することにしました。
ファームウェア、ならびに更新方法については上記Webサイトにあり、更新方法については図による解説付きで丁寧に説明されているので、わかりやすいと思います。
POINT
シリアルコンソールケーブルを使用し、シリアル接続する必要があります。
1. 対象PowerConnectにログインし、enableモードを有効する。
2. 現在のバージョンを確認する。
PC5424# show version
SW version 1.0.0.31 ( date 31-Oct-2007 time 10:32:13 )
Boot version 1.0.0.6 ( date 09-Oct-2007 time 14:09:52 )
HW version 00.00.02
3. TFTPを使用し、PowerConnectのOSイメージをアップロードする。
PC5424# copy tftp://<IPアドレス or サーバ名>/powerconnect_54xx-20046.ros image
29-Apr-2012 22:50:32 %COPY-I-FILECPY: Files Copy - source URL tftp://<IPアドレス or サーバ名>/powerconnect_54xx-20046.ros destination URL flash://image
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!29-Apr-2012 22:53:14 %COPY-W-TRAP: The copy operation was completed successfully
!
Copy: 4591596 bytes copied in 00:02:41 [hh:mm:ss]
4. 次にTFTPを使用し、PowerConnectのbootイメージをアップロードする。
PC5424# copy tftp://<IPアドレス or サーバ名>/powerconnect_54xx_boot-2000.rfb boot
29-Apr-2012 22:54:06 %COPY-I-FILECPY: Files Copy - source URL tftp://<IPアドレス or サーバ名>/powerconnect_54xx_boot-2000.rfb destination URL flash://BOOT
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!29-Apr-2012 22:54:29 %COPY-W-TRAP: The copy operation was completed successfully
!
Copy: 524304 bytes copied in 00:00:23 [hh:mm:ss]
5. bootイメージのバージョンを確認する。
PC5424# show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 1.0.0.31 31-Oct-2007 10:32:13 Active*
2 image-2 2.0.0.46 14-Apr-2011 13:10:53 Not active
"*" designates that the image was selected for the next boot
6. bootイメージをアップロードしたものと切り替える。
PC5424# boot system image-2
PC5424#
PC5424# show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 1.0.0.31 31-Oct-2007 10:32:13 Active
2 image-2 2.0.0.46 14-Apr-2011 13:10:53 Not active*
"*" designates that the image was selected for the next boot
7. PowerConnectを再起動する。
PC5424# reload
This command will reset the whole system and disconnect your current session. Do you want to continue ? (Y/N)[N] Y
Shutting down ...
Shutting down ...
**************************************************
***************** SYSTEM RESET *****************
**************************************************
8. 入れ替えたファームウェアが有効になっていることを確認する。
PC5424> show version
SW version 2.0.0.46 ( date 14-Apr-2011 time 13:10:53 )
Boot version 2.0.0.0 ( date 12-Nov-2008 time 12:56:52 )
HW version 00.00.02
PC5424>
PC5424> show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 1.0.0.31 31-Oct-2007 10:32:13 Not active
2 image-2 2.0.0.46 14-Apr-2011 13:10:53 Active*
"*" designates that the image was selected for the next boot
以上。
その他参考ページ
Upgrading Dell PowerConnect 54xx switch firmware
Read More ...